Online Monitoring System
MQ-100 (S) MULTICHANNEL RACK BASED SYSTEM
MQ-100(S) comprises of sensors, signal conditioning units, display of measured parameters, alarm/trip contacts for protection monitoring of vibration levels of the specific precents of interest. It is designed as per API 670 standards.
The integrated BNC terminals on front provides raw signal for external analysers. One 4-20 mA output per channel. Common relays as well as MODBUS communication interface allows easy integration into contrail system.
Software application vm-100 is available for protection & monitoring of the following parameters:
- Relative shaft Vibration.
- Absolute case Vibration.
- TSI parameters – axial thrust, eccentricity, Case Expansion, Differential expansion, temperature etc.
- Modular construction, IP65 protection.
- Simple to install and operate.
- Easy to expand to any no. Of channels.
- Can be interfaced with data loggers or recorders.
- Field configurable alarm & trip levels for each channel.
- Redundant power supply as standard.
- Hot Insertion to plugs in PCBs.
- Data collection by VM-100.
- Software VM-100 is window operated with friendly GUJ MQ-100(S) can also work with any third party software through Rs 485/ Rs 232/ Models output.
Features:- Designed as per API 670 standards.
SINGLE CHANNEL VIBRATION MONITORING SYSTEM
MQ-200 is a single channel field mounted vibration monitor with IP67/NEMA4X enclosures, 24 V power supply, One 4-20 mA 100p, Range 0-20 mm/sec (Programmable). These are one alarm relay per channel and one trip relay per channel. Can be used with long input leads upto 100 m, and supports the following types of sensors:
- Acceleration sensor.
- Validity sensor.
- Eddy current sensor.
- LVDT sensor.
WIRELESS MACHINE MONITORING SYSTEM FROM ABRO USA
Wireless technology is getting popular as it eliminates the need for hardwiring for communication & also reduces sensor cable lengths. Other benefits include reduction of cost. Mobility/ portability convenience & reliability.
- The module has 5,8,16 inputs in a NEMA4X enclosure and is wired to a transmitter using USB or Rs 485 communication form 500 ft 2 miles distance.
- The transmitter is configured as a wireless bridge using two wireless modules hardwired together to overcome obstacks like hills & buildings using two modules allow flexible placement for best radio reception & distance.
- Main display unit serves is preloaded with KOSHA software such as advanced, email & advanced analysers capabilities.
- Wireless capability can be connected to internet for wide area networking using internet Ethernet module.